量具量仪中英文对照（一）
<p> 1.刀口型直尺:knife straigjht edge</p><p> 2.刀口尺: knife straigjht edge</p>
<p> 3.三棱尺three edges straigjht edge</p>
<p> 4.四棱尺four edges straigjht edge</p>
<p> 5.条式和框式水平仪bar form and square levels</p>
<p> 6.合像水平仪imaging level meter</p>
<p> 7铸铁平板cast iron surface plate</p>
<p> 8.岩石平板granite surface plate</p>
<p> 9.铸铁平尺cast iron straigjht edge</p>
<p> 10.钢平尺和岩石平尺steel and granite straigjht edge</p>
<p> 11.圆度仪roundness measuring instrument</p>
<p> 12.电子水平仪electronic level meter</p>
<p> 13.表面粗糙度比较样块铸造表面roughness comparison specimens cast surface</p>
<p> 14.表面粗糙度比较样块磨、车、铣、插及刨加工表面roughness comparison specimens-ground,turned,bored,milled,shape and planed</p>
<p> 15.表面粗糙度比较样块电火花加工表面roughness comparison specimens spark-erostion machining surfaces</p>
<p> 16.表面粗糙度比较样块抛光加工表面roughness comparison specimens pollshed surfaces</p>
<p> 17.接触式仪器的标称特性</p>
<p> 18.轮廓profiles</p>
<p> 19.轨迹轮廓traced profile</p>
<p> 20.基准轮廓reference profile</p>
<p> 21.总轮廓total profile</p>
<p> 22.原始轮廓primary profile</p>
<p> 23.残余轮廓residual profile</p>
<p> 24.触针式仪器stylus instrument</p>
<p> 25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrument</p>
<p> 26.触针式仪器的部件stylus instrument components</p>
<p> 27.测量环measurement loop</p>
<p> 28.导向基准renfence guide</p>
<p> 29.驱动器drive unit</p>
<p> 30.测头(传感器) probe(pick-up)</p>
<p> 31.拾取单元tracing element</p>
<p> 32.针尖stylus tip</p>
<p> 33.转换器transducer</p>
<p> 34.放大器amplifier</p>
<p> 35.模/数转换器analog-to-digital converter</p>
<p> 36.数据输入data input</p>
<p> 37.数据输出data output </p>
<p> 38.轮廓滤波和评定profile filtering and evaluation</p>
<p> 39.轮廓记录器profile recorder</p>
<p> 40.仪器的计量特性metrological characteristics of the instrument</p>
<p> 41.静测力的变化change of static measuring force</p>
<p> 42.静态测力static measuring force</p>
<p> 43.动态测量力dynamic measuring force
</p>
页:
[1]